Los tubos de silicona platin APST, se fabrican en Salas Blancas y están especialmente diseñados para aplicaciones farmacéuticas, biofarmacia, cosméticas y alimentarias. El tubo APST ha sido sometido a extensas pruebas físicas, químicas y biológicas, y cumple con las normativas USP Clase VI, FDA CFR 177.2600, ISO 10993, NSF 51 y European Pharmacopoeia 3.1.9.
APST es un producto Advantapure®
CARACTERÍSTICAS
- Silicona de bajo grado de volativilidad adecuada para aplicaciones farmacéuticas y biofarmacéuticas.
- APST dispone de un archivo master en la FDA
- Listado por la Fundación Nacional de Sanidad para materiales de equipos alimentarios (NSF-51)
- Certificado libre de ingredientes derivados de animales.
- Rango de temperatura general: -100 ° F (-73.3 ° C) a 400 ° F (204.4 ° C)
- Esterilizable por autoclave o radiación gamma.
- Trazabilidad total.
- Control de calidad documentado según ISO 9001: 2015.
- Para aplicaciones de bomba, vea Tubería de silicona platinum APSPG
ESPECIFICACIONES
| I.D. | WALL | O.D. | WORKING PRESSURE A 21ºC | STANDARD LENGHT | ||||
| (in.) | (mm) | (in.) | (mm) | (in.) | (mm) | (PSI) | (bar) | (ft.) |
| .030 | .76 | .065 | 1.65 | .160 | 4.06 | 53 | 3.7 | 50 |
| .063 | 1.59 | .031 | .79 | .125 | 3.18 | 22 | 1.5 | 50 |
| .063 | 1.59 | .063 | 1.59 | .188 | 4.76 | 33 | 2.3 | 50 |
| .078 | 1.98 | .031 | .79 | .141 | 3.58 | 17 | 1.2 | 50 |
| .094 | 2.38 | .063 | 1.59 | .219 | 5.56 | 25 | 1.7 | 100 |
| .094 | 2.38 | .094 | 2.38 | .281 | 7.14 | 34 | 2.3 | 100 |
| .125 | 3.18 | .063 | 1.59 | .250 | 6.35 | 23 | 1.6 | 50, 100, 500 spool |
| .125 | 3.18 | .094 | 2.38 | .313 | 7.94 | 29 | 2.0 | 50 |
| .125 | 3.18 | .125 | 3.18 | .375 | 9.53 | 37 | 2.6 | 50 |
| .156 | 3.97 | .063 | 1.59 | .281 | 7.14 | n/a | n/a | 100 |
| .156 | 3.97 | .125 | 3.18 | .406 | 10.31 | 33 | 2.3 | 50 |
| .188 | 4.76 | .063 | 1.59 | .313 | 7.94 | 16 | 1.1 | 50 |
| .188 | 4.76 | .094 | 2.38 | .375 | 9.53 | 21 | 1.4 | 50 |
| .188 | 4.76 | .125 | 3.18 | .438 | 11.11 | 25 | 1.7 | 50 |
| .250 | 6.35 | .063 | 1.59 | .375 | 9.53 | 13 | 0.9 | 50, 100 |
| .250 | 6.35 | .094 | 2.38 | .438 | 11.11 | 18 | 1.2 | 50, 100, 300 spool |
| .250 | 6.35 | .125 | 3.18 | .500 | 12.70 | 22 | 1.5 | 50, 100 |
| .313 | 7.94 | .031 | .79 | .375 | 9.53 | n/a | n/a | 50, 100 |
| .313 | 7.94 | .063 | 1.59 | .438 | 11.11 | 11 | 0.8 | 25, 50 |
| .313 | 7.94 | .094 | 2.38 | .500 | 12.70 | 17 | 1.2 | 50, 100 |
| .313 | 7.94 | .125 | 3.18 | .563 | 14.30 | 21 | 1.4 | 50, 100 |
| .375 | 9.53 | .063 | 1.59 | .500 | 12.70 | 10 | 0.7 | 50, 100 |
| .375 | 9.53 | .094 | 2.38 | .563 | 14.30 | 16 | 1.1 | 50, 100 |
| .375 | 9.53 | .125 | 3.18 | .625 | 15.88 | 16 | 1.1 | 25, 50, 100, 150 spool |
| .500 | 12.70 | .063 | 1.59 | .625 | 15.88 | n/a | n/a | 50 |
| .500 | 12.70 | .094 | 2.38 | .688 | 17.48 | 11 | 0.8 | 50 |
| .500 | 12.70 | .125 | 3.18 | .750 | 19.05 | 12 | 0.8 | 50, 100 |
| .625 | 15.88 | .125 | 3.18 | .875 | 22.23 | 11 | 0.8 | 50, 100 |
| .625 | 15.88 | .188 | 4.76 | 1.000 | 25.40 | 16 | 1.1 | 25, 50 |
| .750 | 19.05 | .125 | 3.18 | 1.000 | 25.40 | 10 | 0.7 | 50, 100 |
| .750 | 19.05 | .188 | 4.76 | 1.125 | 28.58 | 14 | 1.0 | 25, 50 |
| .875 | 22.23 | .063 | 1.59 | 1.000 | 25.40 | n/a | n/a | 50 |
| 1.000 | 25.40 | .125 | 3.18 | 1.250 | 31.75 | 8 | 0.6 | 50 |
| 1.000 | 25.40 | .188 | 4.76 | 1.375 | 34.93 | 11 | 0.8 | 25, 50 |
| 1.000 | 25.40 | .250 | 6.35 | 1.500 | 38.10 | 13 | 0.9 | 50 |