Low volatile grade, platinum-cured silicone tubing is clean room produced for critical pharmaceutical, biopharm, cosmetic, and food applications. APST platinum cured tubing has undergone extensive physical, chemical, and biological testing, and meets USP Class VI, FDA CFR 177.2600, ISO 10993, NSF 51 and European Pharmacopoeia 3.1.9 standards. Full BPOG standardized extractables test protocol has been performed by a fully-accredited, third-party test lab.

APST Unreinforced Platinum Cured Silicone Tubing is not intended for implantation, continuous steam applications, or elevated pressure levels.

APST is an Advantapure® product

MAIN FEATURES

Particulate testing per USP 788 is performed quarterly
All assembly and final packaging of extruded tubing is performed in an ISO Class 7 clean room
Low volatile grade silicone suitable for pharmaceutical and biopharm applications
AdvantaSil APST has a Master File with the U.S. Food and Drug Administration (#26598)
Listed by the National Sanitation Foundation for food equipment materials (NSF-51)
Certified free of animal-derived ingredients
General temperature range: -100° F (-73.3° C) to 400° F (204.4° C)
Resists temperature extremes, compression set, chemical attack, ozone, radiation, moisture and environmental exposure
Sterilizable by autoclave or gamma radiation
Available with validated sterility assurance of 10-6 via gamma irradiation per ISO 11137 method VDmax 25
Documented lot traceable with identification on packaging
Documented quality control per ISO 9001:2015
Complete validation package available upon request
For pump applications, see APSPG Pump Grade Silicone Tubing

SPECIFICATIONS

I.D.		WALL		O.D.		WORKING PRESSURE A 21ºC		STANDARD LENGHT
(in.)	(mm)	(in.)	(mm)	(in.)	(mm)	(PSI)	(bar)	(ft.)
.030	.76	.065	1.65	.160	4.06	53	3.7	50
.063	1.59	.031	.79	.125	3.18	22	1.5	50
.063	1.59	.063	1.59	.188	4.76	33	2.3	50
.078	1.98	.031	.79	.141	3.58	17	1.2	50
.094	2.38	.063	1.59	.219	5.56	25	1.7	100
.094	2.38	.094	2.38	.281	7.14	34	2.3	100
.125	3.18	.063	1.59	.250	6.35	23	1.6	50, 100, 500 spool
.125	3.18	.094	2.38	.313	7.94	29	2.0	50
.125	3.18	.125	3.18	.375	9.53	37	2.6	50
.156	3.97	.063	1.59	.281	7.14	n/a	n/a	100
.156	3.97	.125	3.18	.406	10.31	33	2.3	50
.188	4.76	.063	1.59	.313	7.94	16	1.1	50
.188	4.76	.094	2.38	.375	9.53	21	1.4	50
.188	4.76	.125	3.18	.438	11.11	25	1.7	50
.250	6.35	.063	1.59	.375	9.53	13	0.9	50, 100
.250	6.35	.094	2.38	.438	11.11	18	1.2	50, 100, 300 spool
.250	6.35	.125	3.18	.500	12.70	22	1.5	50, 100
.313	7.94	.031	.79	.375	9.53	n/a	n/a	50, 100
.313	7.94	.063	1.59	.438	11.11	11	0.8	25, 50
.313	7.94	.094	2.38	.500	12.70	17	1.2	50, 100
.313	7.94	.125	3.18	.563	14.30	21	1.4	50, 100
.375	9.53	.063	1.59	.500	12.70	10	0.7	50, 100
.375	9.53	.094	2.38	.563	14.30	16	1.1	50, 100
.375	9.53	.125	3.18	.625	15.88	16	1.1	25, 50, 100, 150 spool
.500	12.70	.063	1.59	.625	15.88	n/a	n/a	50
.500	12.70	.094	2.38	.688	17.48	11	0.8	50
.500	12.70	.125	3.18	.750	19.05	12	0.8	50, 100
.625	15.88	.125	3.18	.875	22.23	11	0.8	50, 100
.625	15.88	.188	4.76	1.000	25.40	16	1.1	25, 50
.750	19.05	.125	3.18	1.000	25.40	10	0.7	50, 100
.750	19.05	.188	4.76	1.125	28.58	14	1.0	25, 50
.875	22.23	.063	1.59	1.000	25.40	n/a	n/a	50
1.000	25.40	.125	3.18	1.250	31.75	8	0.6	50
1.000	25.40	.188	4.76	1.375	34.93	11	0.8	25, 50
1.000	25.40	.250	6.35	1.500	38.10	13	0.9	50

APST unreinforced silicone tubing

Login